Ball and hole plate development for evaluation of μCMM
(2013);
Kruger, O. ; v. d. Walt, F. ; Greeff, P.
DOI:
10.7795/810.20130620B
|
Calibration of photomasks for optical coordinate metrology
(2013);
Meli, Felix
DOI:
10.7795/810.20130620C
|
Temperature measurement in dimensional metrology – Why the Steinhart-Hart equation works so well
(2013);
Matus, Michael
DOI:
10.7795/810.20130620D
|
Precision angle comparator using self-calibration of scale errors based on the equal-division-averaged method
(2013);
Kim, Jong-Ahn ; Kim, Jae Wan ; Kang, Chu-Shik ; Jin, Jonghan ; Eom, Tae Bong
DOI:
10.7795/810.20130620F
|
Scanning phase shift interferometry in length measurement
(2013);
Bartl, Guido ; Schödel, Renè
DOI:
10.7795/810.20130620G
|
Subnanometer absolute measurements by means of mixed synthetic-optical homodyne interferometer
(2013);
Pisani, Marco ; Zucco, Massimo
DOI:
10.7795/810.20130620K
|
Synthetic wavelength based transportable telemeter with submicrometer resolution
(2013);
Azouigui, Sheherazade ; Wallerand, Jean-Pierre ; Badr, Thomas ; van den Berg, Steven ; Himbert, Marc ; et al.
DOI:
10.7795/810.20130620M
|
The INRIM 1D comparator with a new interferometric set-up for measurement of diameter gauges and linear artefacts
(2013);
Picotto, Gian Bartolo ; Belotti, Roberto ; Pometto, Marco ; Santiano, Marco
DOI:
10.7795/810.20130620O
|
Uncertainty estimation for comb based laser calibrations by direct comparison of 3 different combs
(2013);
Matus, Michael ; Balling, Petr ; Mache, Werner ; Nießner, Anton ; Kren, Petr
DOI:
10.7795/810.20130620Q
|
Towards traceable bidirectional optical size measurements for optical coordinate measuring machine metrology
(2013);
Köning, Rainer ; Bodermann, Bernd ; Bergmann, Detlef ; Buhr, Egbert ; Häßler-Grohne, Wolfgang ; et al.
DOI:
10.7795/810.20130620R
|
Determination of misalignment and angular scale errors of a laser tracker using a new geometric model and a multi-target network approach
(2013);
Lewis, Andrew ; Hughes, Ben ; Forbes, Alistair ; Sun, Wenjuan ; Veal, Dan ; et al.
DOI:
10.7795/810.20130620S
|
High-precision measurements of the thermal expansion at cryogenic temperature on stable materials
(2013);
Roose, Stéphane ; Heltzel, Stan
DOI:
10.7795/810.20130822T
|
Dynamic Torque Calibration – Necessity and Outline of a Model-Based Approach
(2014);
Klaus, Leonard ; Bruns, Thomas ; Kobusch, Michael
DOI:
10.7795/810.20140929P
|
Evaluating and visualizing the quality of surface points determined from computed tomography volume data
(2015);
Fleßner, Matthias ; Müller, Andreas ; Helmecke, Eric ; Hausotte, Tino
DOI:
10.7795/810.20150223A
|
Determination of metrological structural resolution of a CT system using the frequency response on surface structures
(2015);
Fleßner, Matthias ; Vujaklija, Nemanja ; Helmecke, Eric ; Hausotte, Tino
DOI:
10.7795/810.20150223B
|