Conference Articles

Measurement Standard for Monitoring Performance of Machine Tools in Harsh Environmental Condition (2015); Acko, Bojan; Milfelner, Matjaz; DOI: 10.7795/810.20150331B
Renewal of the gage-block interferometer at INRIM (2015); Bellotti, Roberto; Franco, Mauro; Picotto, Gian Bartolo; Pometto, Marco; DOI: 10.7795/810.20150331A
Recent Developments in Angle Metrology (2015); Yandayan, Tanfer; Geckeler, Ralf D.; Pisani, Marco; Prieto, Emilio; Siewert, Frank; DOI: 10.7795/810.20150325F
The uncertainty evaluation of homodyne signals (2015); Křen, Petr; DOI: 10.7795/810.20150325C
Which diameter matters? (2015); Thalmann, Rudolf; Kündig, Daniel; DOI: 10.7795/810.20150325D
Determination of metrological structural resolution of a CT system using the frequency response on surface structures (2015); Fleßner, Matthias; Vujaklija, Nemanja; Helmecke, Eric; Hausotte, Tino; DOI: 10.7795/810.20150223B
Evaluating and visualizing the quality of surface points determined from computed tomography volume data (2015); Fleßner, Matthias; Müller, Andreas; Helmecke, Eric; Hausotte, Tino; DOI: 10.7795/810.20150223A
Dynamic Torque Calibration – Necessity and Outline of a Model-Based Approach (2014); Klaus, Leonard; Bruns, Thomas; Kobusch, Michael; DOI: 10.7795/810.20140929P
Synthetic wavelength based transportable telemeter with submicrometer resolution (2013); Azouigui, Sheherazade; Wallerand, Jean-Pierre; Badr, Thomas; van den Berg, Steven; Himbert, Marc; et al. DOI: 10.7795/810.20130620M
Temperature measurement in dimensional metrology – Why the Steinhart-Hart equation works so well (2013); Matus, Michael; DOI: 10.7795/810.20130620D
The INRIM 1D comparator with a new interferometric set-up for measurement of diameter gauges and linear artefacts (2013); Picotto, Gian Bartolo; Belotti, Roberto; Pometto, Marco; Santiano, Marco; DOI: 10.7795/810.20130620O
Uncertainty estimation for comb based laser calibrations by direct comparison of 3 different combs (2013); Matus, Michael; Balling, Petr; Mache, Werner; Nießner, Anton; Kren, Petr; DOI: 10.7795/810.20130620Q
Ball and hole plate development for evaluation of μCMM (2013); Kruger, O.; v. d. Walt, F.; Greeff, P.; DOI: 10.7795/810.20130620B
Precision angle comparator using self-calibration of scale errors based on the equal-division-averaged method (2013); Kim, Jong-Ahn; Kim, Jae Wan; Kang, Chu-Shik; Jin, Jonghan; Eom, Tae Bong; DOI: 10.7795/810.20130620F
Towards traceable bidirectional optical size measurements for optical coordinate measuring machine metrology (2013); Köning, Rainer; Bodermann, Bernd; Bergmann, Detlef; Buhr, Egbert; Häßler-Grohne, Wolfgang; et al. DOI: 10.7795/810.20130620R