DOI:	[TO BE ASSIGNED BY JAN STRAẞBURG]
title:	Long Slender Piezo-Resistive Silicon Microprobes for Fast Measurements of Roughness and Mechanical Properties inside Micro-Holes with Diameters below 100 µm
summary: During the past decade, piezo-resistive cantilever type silicon microprobes for high-speed roughness measurements inside high-aspect-ratio microstructures, like injection nozzles or critical gas nozzles have been developed. This article summarizes their metrological properties for fast roughness and shape measurements including noise, damping, tip form, tip wear, and probing forces and presents the ﬁrst results on the measurement of mechanical surface parameters. Due to the small mass of the cantilever microprobes, roughness measurements at very high traverse speeds up to 15 mm/s are possible. At these high scanning speeds, considerable wear of the integrated silicon tips was observed in the past. In this paper, a new tip-testing artefact with rectangular grooves of different width was used to measure this wear and to measure the tip shape, which is needed for morphological ﬁltering of the measured proﬁles and, thus, for accurate form measurements.
To reduce tip wear, the integrated silicon tips were replaced by low-wear spherical diamond tips of a 2 µm radius. Currently, a compact microprobe device with an integrated feed-unit is being developed for high-speed roughness measurements on manufacturing machines. First measurements on sinusoidal artefacts were carried out successfully. Moreover, the ﬁrst measurements of the elastic modulus of a polymer surface applying the contact resonance measurement principle are presented, which indicates the high potential of these microprobes for simultaneous high-speed roughness and mechanical parameter measurements.
creators: Uwe Brand (5.1), Min Xu (5.1), Lutz Doering (1.01), Jannick Langfahl-Klabes (5.1), Heinrich Behle (5.1), Sebastian Büteﬁsch (5.2), Thomas Ahbe (5.1), Bodo Mickan(1.3), Erwin Peiner (TU Braunschweig), Stefan Völlmeke und Thomas Frank (CiS GmbH, Erfurt), Ilia Kiselev, Michael Drexel und Michael Hauptmannl (Breitmeier Messtechnik GmbH, Ettlingen)
license:	CC-BY 4.0 International
keywords: cantilever microprobe; high-speed; contact resonance; tip wear; piezo-resistive; mechanical damping; tip-testing standard
classification: INSPEC B70
project title:	MicroProbes Multifunctional ultrafast microprobes for on-the-machine measurements 
funder: The results in this paper partly come from EMPIR 17IND05 MicroProbes, an EU-funded project, and MikroRau and HMTS, two BMBF-funded projects. MicroProbes has received funding from the EMPIR program co-ﬁnanced by the EU participating states and from the European Union’s Horizon 2020 research and innovation program.	
funder nr: 17IND05	
link to projekt homepage: https://www.ptb.de/empir2018/microprobes/404.html
related objects: https://doi.org/10.3390/s19061410

software: Origin Viewer: https://www.originlab.com/viewer/

Description of the individual files

Each data file within this dataset is related to one figure of the related publication:
Brand et al. Long Slender Piezo-Resistive Silicon Microprobes for Fast Measurements of Roughness and Mechanical Properties inside Micro-Holes with Diameters below 100 µm. Sensors 2019, 19, 1410. https://doi.org/10.3390/s19061410/

Files with the extension TXT, ASC, PR or SMD are space-separated tabular data which can be opened with any text editor.
Files with the extension OPJ or OPJU are OriginLab project files which can be opened with the free Origin Viewer https://www.originlab.com/viewer/ (click-and-run, no installation required)